Generally, the gas fireplace stops working the way it should. You are not receiving the same efficiency it offered when you first installed a gas fireplace. Do not worry. It is not a very uncommon problem that you cannot fix. A gas fireplace requires routine cleaning and maintenance for optimal performance as time passes. If you are sensing any issues, we are about to share gas fireplace troubleshooting tips. Keeping in mind the safety guidelines, let’s start following fireplace troubleshooting guidance.
1. Inspect the pilot light
Before you call the chimney professionals to repair your gas fireplace, check if the fireplace is not turning on because of an extinguished pilot light. Do you know when the pilot lights flame out?
An interruption in the fuel line, buildup of soot and dust, or a strong downdraft are the reasons for a poor pilot light. To relight it, follow the manufacturer’s instructions accurately. If the problem persists, check the fireplace vent cap to see if it has any holes or gaps causing downdraft.
2. Check the fireplace burner
If you notice incorrect burning in the fireplace, the problem might be with your temperature. Therefore, set the thermostat to a high temperature. If it doesn’t solve the problem, consider connecting with professional chimney technicians.
3. Turn on the gas valve
Sometimes, you forget to turn on the gas valve in the fireplace. When you turn the valve off, it will not flow gas into the fireplace, and therefore, your gas fireplace will not ignite. So, it would be best if you ensure that the gas valve is open and on.
4. Circuit breaker
Do you know gas fireplaces hold a fuse for the electric ignition system?
Sudden power sometimes trips the circuit breaker, preventing the gas fireplace from igniting. Therefore, you need to check the circuit breaker and flip it on.
5. Have the enough gas
Head to the propane tank valve and check if there is sufficient gas. Moreover, verify if the main shut-off valve of the natural gas line is open. If the main gas line is available but still unable to deliver the gas, contact your local gas utility company and complain about it.
Why is the gas fireplace ignitor not sparking?
If you notice that your pilot is lit, but the fireplace is not igniting even after pushing the button, check if the igniter is dirty or defective. Clean the ignitor by removing any dirt or debris coming in the way of the thermopile.
Read also:- https://www.smokysweeper.com/blog/tips-to-light-a-gas-fireplace/
Gas fireplace services
An annual inspection and cleaning of the gas fireplace are essential to prevent premature failure and avoid hazardous events. Proper maintenance also enhances its lifespan. We hope the above gas fireplace troubleshooting tips will help you resolve any issues. But remember to be careful while dealing with the fireplace.
If the fireplace troubleshooting tips resolve your issue, do not forget to share them with your friends and family! we are National Fireplace Institute certified gas specialists who reach out to resolve any gas fireplace issue.
For the best Chimney and Fireplace services in Houston, connect with Smoky Sweeper.